 |
Screen Touch Air Spring Air Suspension Hydraulic Hose Crimping Machine Swager
Produktdetails:
| Herkunftsort: | Guangdong, China (Festland) |
| Markenname: | TM |
| Modellnummer: | alle Arten vorbildliches Mercedes, BMW, Audi, Geländewagen, Toyota |
| Certifiion: | TS16949 |
Zahlung und Versand AGB:
| Min Bestellmenge: | 1pcs |
|---|---|
| Preis: | Negotiation |
| Verpackung Informationen: | Exportstandardverpackung oder als Antrag der Kunden |
| Lieferzeit: | Innerhalb 1-monatigen nach empfing Ihre Zahlung |
| Zahlungsbedingungen: | T / T, Western Union, Paypal |
| Versorgungsmaterial-Fähigkeit: | 3,000pcs pro Monat |
|
Detailinformationen |
|||
| Größe: | L850*W900*H1300mm | Kräuselungsstrecke: | 20MM-175MM |
|---|---|---|---|
| Gewicht: | 220kg-250kg | Kräuselungskraft: | 100t |
| Acurracy: | 0.05mm | Spannung: | 380V |
| Leistung: | 34Kw | Systemdruck: | 30MPa |
| Markieren: | hydraulic hose crimp machine,heavy duty shock absorbers |
||
Produkt-Beschreibung
Screen Touch Air Spring Air Suspension Hydraulic Hose Crimping Machine Swager
Production Description
Specifiion
|
Crimping force |
100T |
|
Max opening |
175mm |
|
Crimping range |
20mm-175mm |
|
Acurracy |
0.05mm |
|
Standard dies sets |
10 (size customized) |
|
Voltage |
380V |
|
Power |
4kw |
|
System pressure |
30Mpa |
|
Operate mode |
auto, manual, pedal |
|
Weight |
300kg-350kgs |
|
Dimension |
L850*W900*H1300mm |
|
crimping way |
Transverse withhold |
The brief introduction of high pressure hose crimping machine:
Crimping machine is mainly used for buckling processing for high pressure rubber pipe assembly in the mechanical engineering. It can also be used for buckling the two-way bends, especially large bends and irregular shape bends. This machine features small and portable appearance, big force, low noise and easy to operate. The buckling amount can be precise adjusted through a scale. It makes the mould base division to be more even through the double inclined plane eight-flap mould seat equipped with a high accuracy guiding device.
Notices
1. Add sufficiently 25g of 46# anti-abrasion hydraulic oil.(the original is the best).
2. When buckling, make the joint to loe the mould center as much as possible, the joint is not buckled on the hex nut.
3. Prevent tool and other foreign matter from entering the locking head.
4. After the work is finished for each time, the eight-block mould base must be made to extend to the greatest extent, this can make the spring to be at extension status. If not, the spring will be damage.
5. When working, the hand should not stretch into the locking head.
6. The power supply must be switched off when maintenance is done.
7. Be careful that three-phase machine can’t be in reverse. (Overhead view: motor fan rotates in clockwise direction that is the forward direction.)
* Reply your inquiry in 24 working hours
* OEM,buyer design , buyer label services provided
* Exclusive and unique solution can be provide to our customer by our well-trained and professional engineers and staffs
* Special discount and protection of sales area provided to our distributor
* Timely delivery
* Good after-sale service
* Factory price
FAQ